Tag Archives: neon

DIY: Brass Ring Necklace

DIY HeaderI recently came across a brass ring necklace on Pinterest that caught my eye. Not only is the necklace super original, but it uses unconventional materials that make it such a statement piece.  So… I decided to head to the hardware store! Give this DIY project a try and you’ll absolutely love the finished product!

on black and white background 700what you need collage

layout image 700

Step 1. I began by selecting about four different sized brass rings and laid them out on the floor of the hardware store. I played around with different patterns and sizes until I decided on one shape. I took a picture of the pattern so that I could remember the layout and refer back to the original pattern once I brought the materials home.

linking image 700

Step 2. Begin by taking the two center rings out of the bunch. Take a 12″ piece of nylon and connect the two rings by wrapping the cord about three to four times around the rings. Once you feel they are as secure as possible, tie a tight knot and trim both ends with scissors. This is where you will need to take your lighter out and melt each end.  Once you have burned one end, immediately take your lighter to the melted end and press the side of the lighter firmly against the melted tip. This will seal the knot and prevent the ends from separating or fraying.

You will essentially want to repeat this step with the next ring, working your way from the inside out.  Once you have connected the pattern, you will then need to make the strings from which the rings will hang from. Simply take two 40″ pieces of nylon and loop each cord through the top two rings of your pattern and adjust the length.

black background 700

on black and white background 700

side shot 700

Voila! There you have your very own brass ring necklace!

court 700

Lauren Signature

Lauren Thomas, Marketing Assistant

Advertisements

1 Comment

Filed under DIY, J Banks Design Group

DIY: Paper Flower Chandelier

DIY HeaderFor this DIY I worked with J Banks Designer, Deb Van Plew, to help her create a hanging centerpiece for our hospitality tent at the RBC Heritage Golf Tournament.  Deb envisioned a huge chandelier-like piece composed of vibrant tissue paper flowers intertwined with white paper lanterns that would provide scale and volume.

I was so excited to start this project because Pinterest is overflowing with images of tissue paper flowers and poms. One of the things I like about these flowers is that they capture the beauty of flowers but with a quirky and whimsical twist. Before we began to assemble the ‘chandelier,’ a few of the J Banks team members and I got together to start making the tissue paper flowers.

Materials

IMG_4386

Step 1. Begin by laying the tissue paper flat and stacking the colors in the order you want them to appear in the flower.  I used two pieces of tissue paper per color so that each color would pop!

IMG_4390

Step 2. Once you have laid out all of your tissue paper, start at one end and begin folding the stacked tissue paper like an accordian .  Try to keep the lines even.  This initial fold will be a guide for you throughout the creation of your flower.

IMG_4392

IMG_4393

Step 3. Once you have folded the stack, separate all of the colors and fold them back into the accordian fold individually.

IMG_4394

Step 4. Lay the colors in the order in which you want them to appear in your flower. Begin trimming the ends of the tissue paper into curves or triangles.  We wanted our flowers to be a bit edgier so we went with the triangle shape.

IMG_4397

Step 5. As you are trimming the edges into triangles, begin staggering the length of the various colors of tissue paper.  The shortest pieces will appear in the center of your flower and the longer pieces will be on the outside of the bloom.

IMG_4400

Step 6. Starting with your longest section of tissue paper, carefully unfold the tissue paper sections and layer them on top of each other (like you did in Step 1.).

IMG_4403

Step 7.  Using your guide lines (from Step 2.) carefully refold the tissue back into the accordian shape.

IMG_4413

Step 8. Using a 12″ piece of floral wire, cinch the tissue paper in the middle and then twist the wire on the bottom to secure the fold. Leave the excess wire hanging off the bottom as this is what you will use to secure the flower to the rest of the arrangement later.

IMG_4415

Step 9. Pull the two inner edges of the flower together and begin to open up the bloom.

IMG_4420

Step 10. Starting in the middle of the flower, carefully lift each layer of tissue up.  The tissue is thin and you might have a few little tears in the middle where the paper is bound thickly, but that is okay, just keep going and take your time.  These little uh-ohs won’t show once your flower is complete.

IMG_4422

Step 11. Continue lifting up each layer of tissue paper.

IMG_4428

Step 12. Ta-Da!  Your have a beautiful tissue paper flower!

IMG_4431

Store the flowers somewhere safe and dry until you are ready to use them.

photo 1

On set-up day we laid all of the flowers out so we could see our color selection.

photo 2

Our friend Gene started to shape the ‘chandelier’ by hanging several of the white lanterns in bunches across the top of the tent.

photo 3

With Deb’s guidance, he began tying in the tissue paper flowers using the wire on the back of each flower.

photo[4] copy

We varied the colors and sizes of the flowers.  The asymmetry looked great!

z final

And here is a picture of the finished product – our ‘Paper Flower Chandelier’ was the talk of the tent!

photo 1

After the tournament, we were able to reuse the flowers and lanterns for a retail display!

Stay tuned as I will have another DIY project for you again in June!

Lauren Signature

 

Lauren Thomas, Marketing Assistant

Leave a comment

Filed under DIY